BASE VEHICLE – FORD UTILITY POLICE INTERCEPTOR ECOBOOST 2.1. Vehicle Snapshot 2.1.1 Model: Utility Police Interceptor AWD (K8A) 2.1.2 Engine/Transmission: 2.1.2.1 3.3L V6 Direct Injection (99B) 2.1.2.1.1 Transmission 10-Speed Automatic Transmission (44U) 2.1.3 Interior Equipment Group: 500A 2.1.4 Interior color: Cloth Front Buckets/Vinyl Rear(9W) 2.1.5 Exterior color: Oxford White 2.1.6 50 state emissions (425) 2.2. Factory Vehicle Options 2.2.1. Spot lamp prep kit (51W) 2.2.2. Spot lamps-LED (51V) 2.2.3. Ground straps (60R) 2.2.4. Keyed Alike – 1284x (Option Code =59B) 2.2.5. Front license plate bracket (153) 2.2.6. Badge Delete (16D) 2.3. Tint 2.2.7. Front windows: equivalent to 35% 2.2.8. Rear windows: equivalent to 5% limo 2.4. Wireless Automated Fueling System – WAF 2.4.1. Installation of a commercially available wireless automated fueling system such as ASSETWORKS Fuel Focus 2.4.2. System must be installed into vehicle according to manufacturer’s specifications. 2.4.3. System shall be comprised of three components, a Vehicle Identification Box (VIB), Data Link Connector (DLC) adapter harness and fuel inlet antenna. 2.4.4. Vehicle Identification Box (VIB) must be the latest available model for purchase and compatibility for the year, make and model of vehicle being outfitted. 2.4.5. Data Link Connector (DLC) harness must be compatible with VIB box capabilities and compatible with year, make and model of vehicle being outfitted. 2.4.6. Fuel Inlet Antenna must be the appropriate part for the year make and model of vehicle being outfitted. Antenna must be securely adhered to the filler neck in a way that does not inhibit proper seal between fuel station filling nozzles and the vehicles’ fuel inlet port. Adhesives used shall be fuel resistant to ensure proper adhesion during normal vehicle operation. 2.4.7. Electrical wires providing power, ground and communication shall be conjoined with solder and sealed using weather resistant heat shrink tubing as per manufacturer’s specifications. Electrical power feed to power module during regular vehicle operation shall use; ignition/run start switched power that ensures module power is provided sufficiently for proper system operation. 2.4.8. Wiring between VIB and fuel tank nozzle ring shall be no less than 18 AWG, 3-Conductor, Shielded, with stranded bare copper conductor such as (Coleman Cable Part # 952184609). 2.4.9. Initial system installation shall be inspected by county personnel prior to first vehicle’s delivery, to ensure proper installation and function of system. Systems that are installed outside of manufacturer’s specifications, or use wiring that is below standard, shall be refused and payment on submitted invoices will be withheld until the issue is resolved. 2.4.10. The battery draw of complete vehicle after outfitting to be less than 50ma
