The Contractor shall disassemble existing freezer/cooler and remove offsite. The Contractor shall install new walk-in combination freezer/cooler with floor, condensing unit and evaporator on existing concrete slab 10’ wide x 23’ 5’” long by 4” thick slab. Thermalite Model Custom or equal Walls: Interior walls shall be 0.040” embossed white aluminum, while the exterior walls shall be constructed of 26-gauge acrylume with an embossed finish. Walls shall be insulated with 4” thick and made of UL Underwriters Laboratory Listed Class 1 foam. Floors: The interior floors shall be 0.125” aluminum diamond tread. Exterior floors shall be made of 26-gauge acrylume with an embossed finish. Floors shall be made of 4.125” thick, reinforced to support up to 175 pounds per cart and 5,000 pounds per square foot. Ceilings: Ceilings interior finish shall be 0.040” embossed white aluminum and exterior finish shall be 26 gauge acrylume with a Mesa pattern. Ceilings shall be 5” thick with UL Listed Class 1 Foam and locking mechanisms for external security. Cooler Door shall be constructed with the following: The unit is equipped with two doors. A hinged flush design with a finished opening of approximately 36” wide by 78” high. An unheated internal ramp threshold and magnetic gaskets. Kick plates measuring 34.625” and 36” for the door and jamb. Kason 27C or equal quarter-turn chrome deadbolt latch Specify Brand Bidding: _____________ Kason 1094 Sureclose or equal hydraulic concealed closer Specify Brand Bidding: _____________ Kason 1248 or equal hinges Specify Brand Bidding: _____________ Kason 1967-2 or equal digital thermometer with a switch
