3. Description of Signal Person Training (3 hours) Training will include the following, but not be limit to: • Review Cal/OSHA regulations on signals, sections 1617.1 - 1617.3 and 1618.2 • Preparation/Securing Loads for Transport • Assisting and directing safe load movement • Daily Inspection/Maintenance • Hand Signals • Lockout/Blockout Procedures • Operation Limitations and Hazards • Set-up, Erection, and Dismantling of Equipment Procedures • Equipment Start-up/Shut-Down Procedures • Evaluation and demonstration of hand_signals 4. Description of the Rigging Training (Total of 5 hours) o Classroom Training The classroom training curriculum must include a comprehensive overview of the following: o Review Cal/OSHA Regulations- Heavy Equipment • Title 8 CCR §3650 Industrial Trucks. General. • Title 8 CCR §1593 Haulage Vehicle Operation. • Title 8 CCR §5040-5049 Slings o Review Cal/OSHA Regulations- Cranes • Title 8 CCR §4884-5049 Cranes and Other Hoisting Equipment • Title 8 CCR §161 6.1 Operation • Title_8_CCR_§_1616.4_Overhead_Loads • Title 8 CCR §1615.3 Rigging Equipment for Material Handling • Title 8 CCR §5040-5049 Slings o Inspection/Maintenance Procedures • Review and use Public Works’ Rigging Inspection Checklist (Rigging Checklist is used in conjunction with Daily Mobile Crane Operator Checklist), see Exhibit I. o Wire rope and slings o Chain slings o Synthetic rope slings o Synthetic round slings o Metal mesh slings o Working near overhead lines. o Overhead Powerline Assessment o Safe Sling Use and Proper Rigging Techniques o Calculate weight of loads o Sling and hitch selection o Effects of sling angle o Proper Use of Rigging Accessories • Shackles • Eye Bolts o Critique Rigging Equipment o Evaluation o Virtual Demonstration
