1. Minimum GVW – 62,000 -pounds Y N 2. Wheelbase Dimensions - Cab to CT 174 - 186-inches or as required for unit being specified. Y N 3. Front axle - 20,000-pounds, 71-inch Kingpin setting. Y N 4. Front springs - 20,000-pounds Y N 5. Axle rear, tandem, single reduction, 46,000-pounds. capacity with lube oil pump. Gear ratio for truck to be determined by successful bidder and Director of Fleet Maintenance. Y N 6. Drive axle drain plugs, (2) magnetic. Y N 7. Power divider lock, air operated, cab control with indicator light in dash. Y N 8. Differential lock on rear differential, control mounted in dash with indicator light to show that is energized. Y N 9. Suspension, rear, tandem, Hendrickson HMX 460 Haulmaax, 54-inches spacing, 46,000- pounds. capacity with shock absorbers. Y N 10. Full Disk Air Brakes, Must be Refuse Brakes. Y N 11. Brake chambers, spring, both rear axles parking. Y N 12. Brake lines color and size coded nylon. Y N 13. Drain valves for air tanks: (Pull cable type). Y N 14. Gauge, air pressure (2) air 1 and 2 gauge located instrument cluster. May be a single air gauge, with dual needle. Y N 15. Parking brake valve controlled by yellow knob, located in instrument panel or dash. Y N 16. Slack adjusters, front and rear to be self-adjusting. Y N 17. Spring brake modulator valve. Y N 18. ABS (Bendix anti-lock brake system) or approved equal, 6S6M and electronic traction control. Y N 19. Air dryer (Bendix AD-iS EP) with heater.
