Specifications include, but are not limited to: 32.3. Septic Tank Pumping: The Vendor shall remove all liquids, solids and sludge from the septic tank. Damaged turf from cover removal activities shall be repaired as directed by the State agency. The Vendor shall remove all material off-site and properly dispose of all material in accordance with all local, state and federal regulations. 32.4. Septic Tank Cleaning: The Vendor shall clean the septic tank after pumping at least once per year using industry standards, pressure washing, and appropriate chemicals as needed. The state site representative shall provide approval of cleaning prior to the start of the cleaning. The Vendor shall inspect the tank and its components for signs of any damage, wear, or corrosion. The state site representative shall view the tank after cleaning before reinstalling the cover. The Vendor shall provide the state site representative with a report of the inspection prior to leaving the site. 32.5. Holding Tank Pumping: A holding tank is defined as a tank holding material other than those contained in septic tanks (i.e. kitchen grease, oil / water separator, etc.). The Vendor shall remove all liquid and solids from the holding tank. Damaged turf from cover removal activities shall be repaired as directed by the State agency. The Vendor shall remove all material off-site and properly dispose of all material in accordance with all local, state and federal regulations.
