Powertrain and Engine Minimum engine horsepower-150 Must have engine oil cooler, hydraulic oil cooler with reversing fan Minimum 45-gallon fuel tank Hydraulic driven fan not less than 20” in diameter Can be reversed by the operator Two (2) heavy duty axles with full time 4-wheel drive and 4-wheel steering with 3 modes (4-wheel steer, front steer only, and crab steer). Limited slip front axle-rear axle shall have 100% operator controlled locking differential Minimum 2-speed transmission Drive axle pump shall be heavy duty closed loop with pump and filter Hydrostatic braking and a secondary fool-controlled service brake Electric over hydraulic parking that is spring applied and pressure released Boom Features and Mowing Standard boom features should include but not limited to – horizontal swing, vertical lift, dipper reach, mower head tilt, and mower door open and close. All boom functions as well as axle stabilizer system must be controlled by the operator’s right hand and joy stick Boom must swing no less than 175 degrees Mower head will be powered by a dedicated closed loop piston pump, capable of not less than 4500PSI Standard 60” mower deck with at least two (2) double sided sling blades, not less than 5/8” thick. The mower deck shall rotate at least 90 degrees and be controlled by the operator’s joystick. Boom and mower shall rest in a cradle for transport Must have counter weight of not less than 3500 lbs. Cab and Other Features Cab shall be mounted on isolators to reduce noise and vibrations Right side of cab shall have at least ½” Lexan or equivalent for safety Steering column will have full tilt, telescopic features, must include a horn, and steering knob Operator’s seat will be cloth, air ride, two armrests, and lumbar support Cab must have heat, A/C, and vent to defrosting windshield At least one window wiper on front windshield with washer function and multi-speed switch Must have at least two (2) rear view mirrors, with one (1) being mounted inside the cab Must have a monitor to view engine, performance, and other functions of the machine Unit must have LED warning lights on back of cab and all four (4) corners of the machine for safety Unit must have a backup alarm Unit must have a slow-moving vehicle emblem on the rear Unit shall be equipped with LED driving lights, high and low beam headlights, turn signals, LED hazard lights, brake lights, and backup lights Must have in cab audible and visual alarms for low hydraulic oil, high engine temperature, and engine oil pressure AM/FM radio with Bluetooth Minimum of one (1) locking tool box Backup alarm and camera Quick disconnect system for boom attachments Standard skid steer plate for front mount implement
