• Minimum 8-gauge abrasion resistant Hi-Tensile steel construction throughout having a minimum 50,000 PSI yield strength except where material required is specifically noted later in this paragraph. • The underside of the body's structure shall not have any open areas that would allow material to gather in and build up and to also help facilitate cleaning the body underneath. • Sides shall be reinforced with a formed top rail, formed rub rail and two (2 ea.) 8" min , full length sloped, formed horizontal brace between the top rail and rub rail per side and include 2 ea. additional 3/8" steel triangular shaped tie down plates per side with a 2" hole located between the top and middle horizontal box brace, located 15" s from the front and 21-1/2" from the rear. • All body plates , including floor, shall be one piece (splicing not allowed). • All welds in the body are io be continuous (Fully Welded). • Body outside dimension shall not be less than 95-1/2" +/- 1/4" over wheels/tires.
