GENERAL REQUIREMENT FOR ALL PROJECT SPECIFICATIONS 1. All work performed shall conform to the General Standards herein, DEP Lead Management Regulations (Chapter 424), HUD requirements for Notification, Evaluation, and “Reduction of Lead-Based Paint Hazards in Federally Owned Residential Property and Housing receiving Federal assistance” (24 CFR Part 35), EPA Renovation, Repair and Painting Rule, manufactures recommendations, and all applicable Local and State building codes, laws and regulations. If no local building code exists, the MUBEC will apply. 2. Scrape inspections are required for removal of paint from components (abatement or interim control). Scrape inspections are required for both interior and exterior work prior to the priming and or painting process. If a scrape inspection has not been performed, the Contractor will be required to remove any paint to ensure compliance with this section. 3. Any and all Maine DEP project variances must also be approved in writing by the Lead Designer and The Biddeford Lead Program prior to implementation. NOTE: Monetary change orders may be required by The City of Biddeford. 4. All measurements are approximate and must be verified by the Contractor. No claim for additional funds due to discrepancies in measurements or quantities shall not be honored.
