1. Install all materials according to manufacturer's written instructions. 2. Provide all cut sheets on materials to the Owner. 3. Remove R-22 from existing chiller, transfer to Owner provided canisters and give it to Owner. 7. Provide lift for chiller removal and installation. Properly and legally dispose of old unit. 10. Clean all the chiller panels and surrounding area after completion of work. 11. Tie new chiller into existing Building Automation System (BAS). Automated Logic Chicago. 12. Provide Owner with labor and manufacturer’s warranty. GENERAL HVAC Guide Specifications Size Range: 10 to 60 Tons (35 to 211 kW) Nominal HFC - R32 Carrier Model Number: 30RC-0205610-05 or equivalent. Other brands or models must be approved before bid opening by Owner. Part 1 — General 1.01 SYSTEM DESCRIPTION A. Microprocessor controlled, air-cooled liquid chiller for outdoor installation, utilizing scroll compressors, low sound fans, electronic expansion valve, optional hydronic pump system and fluid storage tank. For units that incorporate Greenspeed intelligence, all fans are controlled with variable speed fan drive motors. Chiller software shall be specifically developed to coordinate optimal fan speed for application conditions and provide refrigerant circuit optimization, resulting in higher part load efficiency and reduced acoustic levels.