1. Thoroughly clean and prepare courts through pressure washing, power blowing, hand scraping, and application of appropriate cleaning solutions as necessary for proper adherence of coatings. 2. Cracks on the current pavement that are on or around the playing surface of the courts should be dug up and repaired, rather than just patched over. Cracks that are NOT on or around the playing surface may be patched over with Acrylic Sport Patch. 3. Fill any depressions in courts with Sport Patch that covers the depth of a nickel to remove standing water spots. 4. Apply two (2) coats of Acrylic Resurfacer to provide proper texture. Dilution of emulsion shall not exceed 25% by volume. Application shall be performed by skilled workmen in accordance with manufacturer’s instructions. Material should not be applied when rain is imminent or when the temperature is below 55 degrees Fahrenheit. 5. Acrylic Color Finish System: To provide a surface properly drained, without depressions exceeding acceptable tolerance. To provide a surface of uniform texture, speed of play and desired playing quality. To provide a weather-resistant and ultra-violet-resistant, durable, non-glare, protective finish.
