On behalf of the Tennessee Valley Healthcare System (TVHS), Network Contracting Office (NCO) 9 is issuing this Sources Sought Notice (SSN) as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for a firm-fixed-priced purchase order for Wallboard Materials located at the Tennessee Valley Healthcare System (TVHS), for the Nashville campus located at 1310 24th Avenue South, Nashville, TN 37212. The result of this market research will contribute to determining the method of procurement. The Department of Veterans Affairs, Network Contracting Office 9, is seeking brand name or equal to CLIN Structure on Page 9. Only items manufactured in the United States will be accepted. The information above is intended to be descriptive, and not restrictive, to indicate the quality of equipment that will be satisfactory. It is the responsibility of the interested source to demonstrate to the Government that the interested source can provide equipment that fulfills the required specifications. If you are interested, and can provide supplies listed on page 9 that meets or exceeds the specifications listed, please provide the requested information below: The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 327420 Gypsum Product Manufacturing. Mark if your firm is eligible for participation in one of the following small business programs. If so, please indicate the program: [ ] yes [ ] no - Small Business (SB) [ ] yes [ ] no - HUBZone [ ] yes [ ] no - Small Business 8(a) [ ] yes [ ] no - Small Disadvantaged Business (SDB) [ ] yes [ ] no - Women-Owned (WO) Small Business (WOSB) [ ] yes [ ] no - Service Disabled Veteran Owned Small Business (SDVOSB) [ ] yes [ ] no - Veteran Owned Small Business (VOSB) [ ] yes [ ] no - Large Business [ ] yes [ ] no - Other (please specify) ALL SDVOSB,VOSB, HUBZONE, WOSB, SB, SB 8(A), AND SDB CONTRACTORS MUST BE IN COMPLIANCE WITH THE NON-MANUFACTURER RULE AS OUTLINED IN 13 CFR 121.406. Nonmanufacturer Rule 13 CFR 121.406(b) Nonmanufacturers states (1) A firm may qualify as a small business concern for a requirement to provide manufactured products or other supply items as a nonmanufacturer if it: (i) Does not exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS Code 541519); (ii) Is primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied; (iii) Takes ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice; and (iv) Will supply the end item of a small business manufacturer, processor or producer made in the United States, or obtains a waiver of such requirement pursuant to paragraph (b)(5) of this section. [ ] yes [ ] no Are you the Original Equipment Manufacturer (OEM)? [ ] yes [ ] no If not the OEM, are you an authorized distributor, and can produce a letter from the OEM? [ ] yes [ ] no Are you classified as a nonmanufacturer by the criteria stated above in 13 CFR 121.406(b)(i-iv)? [ ] yes [ ] no Is this product available on your GSA/FSS or other GWAC Contract? If so, what is your contract number?_____________________ [ ] yes [ ] no Does your equipment conform to the Buy American Act and FAR 52.225-1? 52.225-1 Buy American-Supplies | Acquisition.GOV [ ] yes [ ] no Is the product manufactured in the United States? What is the estimated Delivery Date After Receipt of Order (ARO)? _____________ Please include the following information: Company Name: POC: UEI: Address: Email: 2. If your organization has the potential capacity to provide these supplies, please provide the following information: All SDVOSB,VOSB, Hubzone, WOSB, SB, SB 8(a), and SDB contractors must provide proof of compliance with the non-manufacturer rule, provide a product manufactured in the USA, and an authorized distributor letter from the manufacturer. Any responses received without this information cannot be used to make a determination to set requirements aside if the requested information is not provided. 3. NOTE: Respondent claiming SDVOSB and VOSB status shall be registered, and Center for Veterans Enterprise (CVE) verified in SBA Veteran Small Business Certification (VetCert) https://veterans.certify.sba.gov/ 4. Based on the responses to this SSN/market research, this requirement may be set-aside for SDVOSBs, VOSBs, small businesses, procured through full and open competition, or sole sourced. 5. Submission Instructions: Interested parties who consider themselves qualified to perform the services are invited to submit a response to this SSN by 10:00 AM EST, November 29, 2024. All responses under this SSN must be emailed to Kristie.collins@va.gov. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. 6. SAM: Interested parties shall be register in the System for Award Management (SAM) as prescribed in Federal Acquisition Regulation Clause 52.232-33. SAM information can be obtained by accessing the internet at www.sam.gov or by calling 1-866-606-8220. 7. Disclaimer and Important Notes. This notice does not obligate the government to award a contract or otherwise pay for the information provided in response to this SSN. The government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the government to determine the organization s qualifications to perform the work. Respondents are advised that the government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a pre-solicitation synopsis and solicitation or combined solicitation may be published in Contract Opportunities (formerly Federal Business Opportunities or FBO). However, responses to this notice shall not be considered adequate responses to a solicitation. 8. Confidentiality. No proprietary, classified, confidential, or sensitive information should be included in your response. The government reserves the right to use any non-proprietary technical information in any resultant solicitation(s). 9. See SOW on the following page. 10. See CLIN structure on the following page. STATEMENT OF WORK GENERAL INFORMATION Title of Project: Wallboard project OR Scope of Work: This requirement is Materials for in House wallboard installation in OR at the Tennessee Valley Healthcare System (TVHS), for the Nashville campus located at 1310 24th Avenue South, Nashville, TN 37212. Background: Installation of wallboard in OR to minimize wall damage. M&O team will install, we just need supply for installation. Performance Period: The Contractor will deliver the supplies during normal business hours 7:30am To 3:30pm (unless other times are stipulated by the Contracting Officer s Representative (COR)). CONTRACT AWARD MEETING The contractor shall not commence performance on the tasks in this SOW until the CO has conducted a kickoff meeting or has advised the contractor that a kickoff meeting is waived. GENERAL REQUIREMENTS Work Requirements COR Contact. COR contact for supplies will be Maintenance Supervisor, John Messer (615-873-6893). Hours of Work and Location(s) of Jobs. The hours of work will be during normal business hours of 7:30am To 3:30pm M-F at TVHS. Supporting Information Place of Performance. The delivery of the wallboard will be performed at the TVHS located at 1310 24th Ave South Nashville, TN 37212. Period of Performance. The Contractor shall have delivered all specified work within 30 days of the contractual agreement. SPECIFIC MANDATORY TASKS AND ASSOCIATED DELIVERABLES Contractor Furnished Materials: The contractor shall provide All labor, materials, equipment to perform the job. When "furnish", "provide", "install", or similar term is used it shall mean a complete installation, ready for use. Government Furnished Materials and Services. Government furnished property, if any, will be identified and will only be used for the performance of this contract unless otherwise authorized by the Contracting Officer. The Contractor shall, always, take all steps necessary for maintenance and preservation of all Government-furnished property. The Contractor shall comply with all reasonable requests of the Contracting Officer to enclose, or specifically protect, Government-furnished property. Qualifications of Key Personnel. The Contractor s employees should be knowledgeable of standards associated with temperature monitoring, support, and maintenance. Supervision/Communications. At all times during the performance, the Contractor's Superintendent (if applicable) shall be available by cellular phone. Prior to beginning any work, the Contractor shall supply the COR with the telephone number for the Superintendent. The Contractor's "Competent Person" that meets OSHA training guidelines, can make decisions and acting on behalf of the Contractor shall be physically always located on site during performance of the contract. If the Contractor's Competent Person is absent from the job site for an extended period, the COR may send all Contractor/sub-contractor employees off the job. Security Requirements. Contractor shall identify which employees will be working under the awarded contract. Contractor personnel shall include employees, sub-contractors, subcontractor employees, suppliers and delivery personnel entering the Medical Center. This does not apply to suppliers and delivery personnel making deliveries to the VA warehouse dock only. Those employees shall bring photo ID to obtain a VA Contractor identification badge that shall be always worn above the belt while on Medical Center property. Contractor's employees shall return all I.D. badges to designated personnel at time designated in the task order. The Contracting Officer's Representative (COR) is responsible for the inspection of the work called for in this job. The Contracting Officer's Representative will be identified in the task order by name, telephone number and location. Inspections made by the COR are for the sole benefit of the Government and do not relieve the Contractor of any quality control responsibilities. The Safety Manger is responsible for safety inspections of all contract operations. The Safety Manager will be identified in the task order by name, phone number and location. Drawings General. Contract drawings (if applicable) will indicate the extent and location of work. If any departure from the contract drawings is deemed necessary by the Contractor, the details of such departure and the reasons therefore shall be submitted to the Contracting Officer for approval as soon as practical. No such departure shall be made without proper written permission of the Contracting Officer. The Contractor is responsible for all information and requirements in drawings and specifications that pertain to the task order. Verification of Dimensions. The Contractor shall visit the job site to thoroughly familiarize himself with all the details of the work and working conditions. The Contractor shall also verify all dimensions in the field and shall advise the Contracting Officer of any discrepancy before performing any work. The Contractor shall be specifically responsible for the coordination and proper relation of his work to the building, structure, phasing and ensure the safety of employees and workmen. Smoking Policy. The Contractor shall not allow smoking in any building. The Contractor shall ensure employees smoke only in designated outdoor areas, 50 feet away from buildings. Parking/Traffic Regulations. The Contractor shall not park on grassy areas unless approved by the COR and the Contractor agrees to restore areas back to VA standards. Drivers should be particularly concerned with pedestrian traffic. Yield to pedestrians in crosswalks. Posted speed limits and all other traffic controls are to be always observed by operators. Seat belt use is mandatory on the VA grounds. There are no reserved parking spots for contractors at this VA hospital. The contractor is responsible for making their own parking plans off VA site. They may park only long enough on site, to load and unload supplies. The Contractor shall always keep the work area, including any areas where materials/equipment is being stored, free from accumulations of waste materials. The COR will designate a contractor staging area due to space limitations. The contractor is responsible for disposing all waste. Upon completion of a segment of work, the Contractor shall demonstrate to the COR that the work is complete, and the system is working. SCHEDULE FOR DELIVERABLES None. CHANGES TO STATEMENT OF WORK Any changes to this SOW shall be authorized and approved only through written modifications to the contract by the CO. A copy of each modification will be kept in a project folder along with all other products of the project. Costs incurred by the contractor through the actions of parties other than the CO shall be borne by the contractor. REPORTING REQUIREMENTS Upon arrival, every day during removal and installation, upon checkout. TRAVEL [If applicable] None. GOVERNMENT RESPONSIBILITIES [If applicable] None. CONTRACTOR EXPERIENCE REQUIREMENTS The contractor must inform the VHA COR when personnel are removed from the contract for any reason. If a key person becomes unavailable to complete the contract, proposed substitutions of key personnel shall be made to the COR and CO. CONFIDENTIALITY AND NONDISCLOSURE It is agreed that: The preliminary and final deliverables, and all associated working papers, application source code, and other material deemed relevant by VA which have been generated by the contractor in the performance of this contract, are the exclusive property of the U.S. Government and shall be submitted to the CO at the conclusion of the contract. The CO will be the sole authorized official to release, verbally or in writing, any data, draft deliverables, final deliverables, or any other written or printed materials pertaining to this contract. No information shall be released by the contractor. Any request for information relating to this contract, presented to the contractor, shall be submitted to the CO for response. Press releases, marketing material, or any other printed or electronic documentation related to this project, shall not be publicized without the written approval of the CO. CLIN STRUCTURE CLIN STRUCTURE CLIN # PRODUCT NUMBER PRODUCT DESCRIPTION UM QUANTITY UNIT PRICE EXTENSION 1 Acrovyn 4000 wall Covering, .075" thick sheet with standard Suede texture. Sheet size 4' x 10'. Acrovyn Interiors Water Based Mastic Primer and Acrovyn Interiors Heavy Duty Water Based Mastic Adhesive supplied. EA 60 Â Â 2 Acrovyn 4000 Wall Covering Wainscot Trim - for .075" - 10' length. EA 80 Â Â 3 Acrovyn 4000 Wall Covering Vertical Joint Trim - for .075" - 10' length. EA 15 Â Â 4 Freight EA 1 Â Â
