Dual Tray Sheet Feeder (Equivalent to Duplo DSF-2200) ______ Must have a minimum of 7.87” pile capacity main tray ______ Must have a minimum of 2.56” cover feed tray ______ Must have a vacuum belt feed system ______ Must have Technology to facilitate the feeding of a variety of fine quality paper from 64 gsm up to 300 gsm ______ Must provide a reliable source of vacuum/suction for primary purpose of feeding ______ Must provide for air separation on the non-operator side for the primary purpose of feeding ______ Must be able to process a minimum sheet width of approximately 4.13” ______ Must feed approximately 200 sheets per minute on LTR size paper ______ Must have ultra-sonic double sheet detection ______ Must have OMR reader as standard feature ______ Must include offline loading cart ______ Must have long sheet extension tray for landscape style booklets ______ Power 120V 60Hz 2.0A 430W Booklet Maker (Equivalent to Duplo DMB700) _____ Must be able to receive paper one sheet at a time (Sheet by Sheet) from a digital sheet feeder or as a set (Set by Set) from acollator tower. _____ Must come with 2 Hohner Stitch Heads. _____ Must be able to process 4-stitch booklets with 2 stitch heads _____ Must be able to process up to 50 sheets of 81 gsm paper. (200 page book) _____ Must be able to receive paper size of 14 inch x 24 inch _____ Must be able to receive a minimum paper size of approximately 4.13 inch x 6.75 inch Must be able to perform the following Processing Modes: o Saddle Stitch o Side Stitch o Corner Stitch o Saddle Stitch without Fold o Side Stitch with Fold, o Corner Stitch with Fold o No Stitch, No Fold o 1 - 5 sheets with 1 sheet insert. _____ Stitch Section must have side and back jogging to ensure accurate alignment of the paper prior to stitching the set. _____ Fold Section must have side and back jogging to ensure accurate alignment of the set prior to folding. _____ Must have tool less stitch skew adjustment _____ Must have tool-less fold skew and side guide adjustment _____ Must be able to adjust the stitch length and stitch legs without any tools _____ Maximum processing speed approximately 5,200 sets/ hour (5 sheets, minimum finish size). _____ Must have an adjustable touch screen control panel. _____ Must be simple and easy to observe and monitor the process. _____ Must be able to start and stop the system from the booklet maker control panel. _____ Must have wire draw detection. _____ Must have integral side and corner stitch catch tray that pulls out towards the operator side and shuts machine down whentray is full. _____ Must have paper monitoring and jam detectors throughout the entire paper process path. _____ Following must be auto setting. o Stitch head and clincher position o Stitch and Fold Section Registration Stopper o Stitch and Fold Section Side Guides o Stitch and Fold Back Jogger o Fold Roller Gap _____ Must be 120 V, 60 Hz, 4.5 A
