4.1 V-NECK WORK SHIRTS: • Shirt will have no buttons • All shirt seams shall be 3-needle felled • Fabric shall be 7 ½ oz. Twill – 65% polyester and 35% combed cotton equal to IronClad industrial finish fabric • Shirts shall be squared at the bottom • Shirts shall have raglan sleeves • Dual duty thread shall be used to allow for seams to stretch and for extra strength • All points of strain shall be bar tacked and reinforced • Thread must be the same color as the fabric • Labels must be color coded by size and be made of woven fabric • Shirts must have one breast pocket, double-stitched and bar tacked • Shirts shall have no raw or frayed edges • Stenciling required on all shirts (each color will be stenciled differently) • Must have a wide selection of colors available • Some shirts will be striped, i.e. green and white, etc 4.2 ELASTIC-WAIST WORK PANTS: • Pants shall have no pockets • All pant seams shall be 3-needle felled • Fabric shall be 7 ½ oz. Twill – 65% polyester and 35% combed cotton equal to IronClad industrial finish fabric • Pants shall have elastic waist with woven heat resistant 30 gauge 1.5” elastic • Dual duty thread shall be used to allow for seams to stretch and for extra strength • All points of strain shall be bar-tacked and reinforced • Thread must be the same color as the fabric • Labels must be color coded by size and be made of woven fabric • Pants shall have no raw or frayed edges • 26-gauge, heavy-duty elastic with 140% stretch • Elastic shall be attached with over edge stitching using not less than 10 stitches per inch, expanded. • Waistband shall be circular stitched with four rows of expansion stitching • Must have a wide selection of colors available • Some pants will be striped, i.e. green and white, etc
