The contractor shall install the system at Texas A&M University, in the Engineering Innovation Center. Texas A&M University will provide 110 VAC single phase and 208 VAC single phase and/or three-phase electrical power, building cooling water, process gases and gas lines at that location for the proper operation of the tool. The contractor shall install the system to the plumbing and electrical fixtures available in the designated location. GENERAL DESCRIPTION AND PRIMARY COMPONENTS The requirements are for an automated data acquisition, temperature, and magnetic field control platform to perform magnetization, electrical measurements of materials and devices. The dewar housing the sample chamber system must not rely on the transfer of liquid helium from a separate storage dewar for refrigerant supply; it must include a pulse tube refrigerator cryocooler and a gaseous helium compressor. The magnetic field must be generated in the sample space uniformly by a superconducting coil magnet. The system must come supplied with sample holders. The system must be computer controlled via user-friendly, menu-driven software
