Specifications include, but are not limited to: 1. The various services described below are provided as part of our limited Inspection, Maintenance and Repair Program: 2. Annual Winter Maintenance - Once a year, through Preventative Maintenance Schedule will be performed including all of the following: 3. Furnish oil filters and gaskets. (Use only genuine original parts) YES NO (Required: Check only one) 4. Pressurize and leak check. YES NO (Required: Check only one) 5. Detailed inspection of purges system and thorough cleaning of purge. Change purges unit drier cores. Check all sensors and oil orifices. YES NO (Required: Check only one) 6. Check condition of contacts for wear, pitting, etc. YES NO (Required: Check only one) 7. Check and calibrate safety controls. YES NO (Required: Check only one) 8. Meg Compressor Motor, Oil Pump Motor and Record Compressor Vibration Readings taken with an IRD Model # 838 analyzer or equivalent. YES NO (Required: Check only one) 9. Check overloads in main starter, tighten all starter terminals and check contacts for wear. YES NO (Required: Check only one) 10. Tighten motor terminal and control panel terminals. YES NO (Required: Check only one) 11. Clean oil pressure regulator and check and adjust if necessary. YES NO (Required: Check only one) 12. Tighten oil heater leads. YES NO (Required: Check only one) 13. Check operation of vane positioner. YES NO (Required: Check only one) 14. Take oil sample and have analyzed for acid, moisture and wear metals content. YES NO (Required: Check only one) 15. Advise and quote on oil changes when so indicated by oil analysis. (Use Trane Oil -22 on Trane Chillers) YES NO (Required: Check only one)
