CAH-2020-07-30-001 - Installation of a Traffic Bearing Membrane on the Parking Structure

Complete Installation & Materials of a Traffic Bearing Membrane on the Rooftop
Deck of the Auburn Hills Municipal Parking Structure

Includes all labor, material and equipment to complete the following:

• Mobilize to site with all necessary equipment and material
• Barricade the roof level and access ramps
• By means of a ride on shotblaster, prepare the surface to remove dirt, grease and any other contaminants
• Use of an air compressor to blow down the deck and clean up any dust and shot blasting beads
• Tape off drains and door thresholds to protect them from the coating process
• Prepare surfaces with a primer coat including a 4” strip along the bottom of the walls and columns
• Install a urethane base coat on everything that receives the primer
• Apply a second coat of urethane with a small aggregate broadcasted for slip resistance
• Install a UV resistant urethane topcoat to lock in the aggregate coat
• Replace all parking lines and symbols to match the original layout and complete the waterproofing traffic
bearing membrane

***Please include information on the product & materials to be used***

It shall be understood and agreed upon by the contractor that the work herein described
shall be completed in every detail, even though every item involved is not specifically
mentioned. The contractor shall be held to provide all labor and materials for the
completion of work intended and described.

See complete bid packet for full conditions, terms and requirements.