ITB-PAVING082906 - REPAVING OF SLUDGE PAD AND PARKING LOT EXTENSION

Summary of Specifications:
Catch Basin Adjustment Adjust (1) Catch basin to proper elevation for drainage (approximately 6”) If clean out is needed it will be provided by WWTP Complete 6.0” Overlay – Approximately 38,600 Sq. Ft. Wedge all low areas with asphalt material and compact Apply SS1H emulsion course (tack coat) on base. Sludge Pad – Pothole preparation and repair – Approximately 1,600 Sq. Ft. Barricade and maintain entire work area. Excavate to a maximum depth of 12.0” and remove all waste material legally off-site. Furnish and install 9.0” of 21AA Crushed Concrete and compact in 6”lifts. Place 3.0” of MDOT 4C asphalt material and compact. Resurfacing preparation Scrape off all surface debris with dozer and leave all spoiled material onsite. Use fire hydrant connected water line provided by WWTP to wash and remove all remaining surface debris. Vendors should call and talk to Karl Rudlaff at (248)758-3696 for any questions.