IFB-RM-2020-07-14-002 - City Buildings Parking Lot Maintenance

MUST INCLUDE 3 COPIES OF ALL FORMS WITH YOUR SUBMITTAL
The City of Taylor Building & Grounds Department is requesting bids for crack fill, sealcoat and striping asphalt as specified below. Pricing shall be good through December 31, 2021 and will have an option for a 1 year extension. Quantities are estimates and are not guaranteed and shall not be considered minimums or maximums.
Miscellaneous City Building Parking Lots
Crack fill
Remove all vegetation, moisture and debris by using hot compressed air lance.
Seal cracks and joints with hot applied joint sealant Approx. 150,000 LFT (Quantities are estimates and are not considered minimums or maximums).
Sealant to perform to ASTM-D-6690-A Standards.
Cracks to be sealed using over band method.
Power clean and remove any debris caused by crack sealing operation.
Seal Coat and Striping Approx. 250,000 SFT (Quantities are estimates and are not considered minimums or maximums).
Power Clean and remove debris from lot.
Neutralize oil spots where necessary.
Install 2 coats of latex modified coal tar emulsion. Three pounds of silica sand per gallon of emulsion.
Coating to be installed by pressure truck.
Stripe lot to current configuration.