IFB-DG-2023-12-12-001 - Pavilion Electrical Work

BID RESPONSE
MUST INCLUDE 3 COPIES OF ALL FORMS WITH YOUR SUBMITTAL IF MAILING, OTHERWISE PLEASE SUBMIT DIRECTLY THROUGH BIDNET.
The City of Taylor Purchasing Department on behalf of the Parks Division is seeking bids for electrical work at the Sheridan Open-Air Pavilion located inside Heritage park in Taylor, MI.
The specifications are as follows:
Section 1 - For Light and Sound:
- INSTALL ELECTRICAL SYSTEM TO POWER (3) CAM LOCK BOXES
- 400 AMP CAM LOCKS, 3 PHASE 208/120 VOLT 4 WIRE WITH GROUND.
- INSTALL SEPARATE 200 AMP 3 PHASE 240 VOLT FUSED DISCONNECTS SUPPLYING EACH CAM LOCK BOX
- INSTALL (3) 75 KVA 480 -208/120 VOLT 3 PHASE TRANSFORMERS
- FEED FROM SPARE 400 AMP SWITCH IN DISTRIBUTION PANEL IN ELECTRICAL ROOM TO TRANSFORMER
LOCATION
- INSTALL TROUGH AND (3) 480 VOLT 100 AMP DISCONNECTS AND FUSES TO FEED TRANSFORMER PRIMARY
Section 2 -For RV Outlets:
- INSTALL (8) 50 AMP 3 WIRE 240 VOLT RV RECEPTACLES SPACED ALONG NORTH WALL ON (8) DEDICATED 50
AMP CIRCUITS
- INSTALL 100 KVA 480 – 240/120 VOLT SINGLE PHASE TRANSFORMER AND FEED FROM SPARE 200 AMP
- SWITCH IN DISTRIBUTION PANEL IN ELECTRICAL ROOM
- INSTALL 200 AMP FUSED DISCONNECT TO FEED PRIMARY OF 100 kVA TRANSFORMER
- INSTALL (2)200 AMP “SQUARE D" QO LOAD CENTERS WITH 200 AMP MAIN BREAKER 42 CIRCUIT
Section 3 - For Bay Lights and RGB Light Fixtures:
- INSTALL CONDUIT, WIRING, BOXES AND DEVICES FOR TEN (10) SWITCHES IN THE OPEN AIR AREA OF THE PAVILION. TO BE USED FOR HIGH BAY LIGHTS ON THE SOUTHEAST WALL OF THE PAVILION. (20 AMP SWITCHES)
- INSTALL CONDUIT, WIRING, BOXES, DEVICES, TIMERS AND TWO (2) DEDICATED 20AMP/120VOLT CIRCUITS FOR EIGHT (8) FUTURE RGB LIGHT FIXTURES ON TOP OF THE PILLARS. (FOUR ON WEST PILLARS AND 4 ON EAST PILLARS.) PLEASE FINISH THEM WITH WEATHERPROOF BOXES AND COVERS. PLEASE INSTALL TIMERS IN THE ELECTRICAL ROOM.
Additional Notes:
- No subcontracting is preferred.
- Qualified Electrical Contractors Only.
- All Material New
- Warranty and Labor for 2 Years.
- Follow NEC 2020 Guidelines.
- Would like work completed by April 18th, 2023.