23MR354 - 2446 Seyburn Driveway

Demo existing driveway at 2446 Seyburn- not including approach or sidewalk, prep and form area and pour new concrete.  Level surface, prepare a 3" gravel base over a uniformly graded & compacted subgrade. 
Form and pour concrete - 4" thick by 10' wide driveway.  Provide #10 welded wire mesh, expansion joints at 10' intervals, and a broom finish surface that directs water away from the building. Install 1/4" thick pre-molded joint material where driveway abuts building. Seal joint between building and driveway with a non-sag, single component, urethan sealant.  Include backer rod as required by manufacturer's instructions.  Remove forms. Regrade and seed disturbed areas. The driveway will be 10ft wide and go from sidewalk to back corner of home.