Sealed proposals for the construction of the Public Safety Building Parking Lot Rehabilitation will be received by the Village of Beverly Hills until 11 a.m. Local Time on Thursday, May 21, 2020, at which time and place all bids will be publicly opened and read.
Bidders shall review and comply with the Instructions to Bidders, which are incorporated by reference, and carefully review all Contract Documents, as defined in the Instructions to Bidders. Bids submitted after the exact time specified for, receipt will not be considered.
The Contracts will consist of the following principal items of work and appurtenances as specified herein and shown on the Contract Drawings.
The 2020 HMA Street Repair Program in the Village of Bingham Farms shall consist of approximately the following:
· 2,100 syd of milling 2 inches of the existing pavement with as-needed base repairs
· 235 tons of HMA, 5E1 and HMA, 4E1 each
The Public Safety Building Parking Lot Rehabilitation in the Village of Beverly Hills shall consist of
approximately the following.
· 1,830 syd of milling 2 inches and 3 inches of the existing pavement
· 280 tons of HMA, 5E1
· As-needed curb and gutter and base repairs.
· Parking lot restriping
Copies of Plans and Specifications and Proposal Forms shall be available on or after April 30, 2020 at the offices of Hubbell, Roth & Clark, Inc., Consulting Engineers, 555 Hulet Drive, Bloomfield Hills, Michigan 48302-0360. Please contact the offices of Hubbell Roth & Clark, Inc. at 248-454-6300 or e-mail at frontdesk@hrcengr.com to obtain a copy of the Drawings and Specifications. A non-refundable
payment of SEVENTY-FIVE ($75.00) Dollars is required to purchase Drawings and Specifications. CHECK or CREDIT CARD is acceptable. CREDIT CARD information can be provided over the telephone or via e-mail or CHECKS, made payable to “Hubbell, Roth & Clark, Inc.”, may be mailed to the office. Drawings and Specifications will be sent electronically and shipped by U.P.S. ground upon confirmation of payment. The Bidder is advised that to submit a bid on this project, the Bidder must have purchased a set of Drawings and Specifications from Hubbell, Roth & Clark, Inc.
