The following specification describes a new ambulance that is expected to be acquired by this purchaser, County of Morris. The specification describes the needs of this purchaser as far as chassis configuration and module body design. A state of the art vehicle is required. However, manufacturers that utilize prototype equipment or manufacturing processes will not be considered. The builder's manufacturing history shall be supported by documentation where applicable, and by the reference section within this specification. The benchmark for the initial configuration of this ambulance shall be the current KKK Federal Specification for Ambulances, NFPA 1917 Standard for Automotive Ambulances, or CAAS certification. However, most requirements in this specification exceed the federal specifications because of the specific needs of this purchaser. Please note that the following specifications represent minimum general terms or requirements. While it is not the intent of this purchaser to preclude any qualified bidder from submitting a proposal, it must be clear that any bidder deviating in any substantial manner from these specifications will be rejected as being non-compliant. Alternate brands or manufacturers for specific items or accessories may be acceptable if the proposed alternates are at least equivalent to the item contained in this bid. The bidder must supply and explanation on a separate page for any exception or alternate item that they would like considered. The explanation must detail the specifications which justify the “equivalent or exceeds” requirement. If bidder checks NO on any line item in the specification but does not include and explanation, the County will assume that the bidder cannot comply with that line item of the specification.
