The following specifications are meant to serve as guidelines only and as such, are not meant to be exclusive to any bidder.
Description – R780 – Model 2
R780-102-50: GNSS Receiver – R780-2 Broadband 450-900 Radio
GNSS Smart Antenna, with accessories, Geospatial (2 batteries)
R780-2-ROV: Rover Configuration Level, Full GNSS, Triple Frequency, xFill, Tilt-IMU and Rover
84690-00-GEO: R780 Quick Lock
51218-02-FLY (Seco): Tripod, Thumb Release, Prism Pole
43169-10: Rod- 2.0m Carbon Fiber Range Pole without Bipod
Description – TSC5
TSC5-1-1100-00: TSC5 Controller WWAN, Worldwide region
121951-01-GEO: TSC5/TSC7 Quick Release Pole Mount Clamp with Adjustable Arm
121952-WTG-1: TSC5 Pole Mount Bracket
EWLS-GPS-FW-RNST: TPP – Firmware Maintenance – Survey GPS
WTG-CONFIG-SV: Onsite Configuration of Product or Product Setup/Support, to be provided at the time of delivery by a NYS Licensed Professional Land Surveyor
(2 hours).
Brand Names:
Brand name(s) and /or catalog number(s) are given (if used) for the purpose of identification and to denote the standard of quality designated, and do not, in any way, restrict bidders to a specific make and manufacturer. Bid on items if “equal quality or better” will be considered.
Deviation from specifications:
In the event that the proposed supply items differ from these guidelines, the bidder shall attach an explanation detailing all differences, both above and below these guidelines. Each and every bid will be evaluated based upon the proposed price, specification, product support, performance characteristics and suitability to properly perform stated criteria, is the sole discretion of the county.
Whenever in theses specifications a particular make or model number is indicated, it is done solely to establish the level of quality desired. This should not be interpreted to mean that the make or model specified is the only one acceptable.
Basic Warranty:
The manufacturer’s standard warranty will apply. The warranty shall be honored by all manufacturers’ dealers in New York State. The warranty period for all coverage shall begin on the date the GNSS Package is accepted or put in service, whichever occurs last.
Equipment:
All items of standard equipment which are normally provided by the manufacture shall be furnished unless such items are expressly deleted or are specified to be other than standard. When optional equipment is specified, all components listed in the manufacture’s data book as being included with the options shall be furnished.
Inspection/Acceptance:
The products furnished under these specifications shall be inspected by, or at the direction of the GC Soil & Water Conservation Senior Field Manager or his designee at the destination. Acceptance will not occur until the equipment have passed this inspection and/or all faults are corrected.
